STANDARD JAMB DEPTHS
S-Series: 3 3/4″, 4 5/8″, 4 7/8″, 5″ and 5 3/8″
C-Series (18 gauge): 3 1/2″, 3 3/4″, 4″, 4 5/8″, 4 7/8″, 5″, 5 3/8″, 6 5/8″, 6 7/8″ and 7 1/4″
CUSTOM JAMB DEPTHS
C-Series (18 gauge): 2 5/8″ to 13″ in 1/8″ increments.
Note: The available jamb depths and door weights listed here apply to the Classic Frame in general. Some limitations may apply when looking at specific information. For example, a communicating frame must have a larger minimum jamb depth than listed here.
| | |
|---|
| FRAME MATERIALS | DOOR SIZE & WEIGHT | JAMB DEPTH RANGES |
| Prefinished Steel | Door Thickness:
1 3/8" or 1 3/4"
Max. Door Weight:
250 Lbs. each
Max. Door Width:
2 x 4' – 0"
Max. Door Height:
12' – 0″ ** | Standard Jamb Depths:
S-Series (20 gauge)**: 3 3/4", 4 5/8", 4 7/8", 5" and 5 3/8"
C-Series (18 gauge):
3 1/2", 3 3/4", 4", 4 5/8", 4 7/8", 5", 5 3/8", 6 5/8", 6 7/8" and 7 1/4"
Custom Jamb Depth:
C-Series (18 gauge): 3 3/8" to 13" in 1/8" increments. |
| MAX ASSEMBLY SIZE | | |
Max. Assembly Width:
12' – 0" * (for Standard Jamb Depths)
10' – 1" * (for Custom Jamb Depths)
Max. Assembly Height:
12' – 0" ** (for Standard Jamb Depths)
10' – 1" ** (for Custom Jamb Depths)
Max. Mullion Length:
10' – 1" | | |
| * Wider assemblies will have splice joints in frame and casing.
** Height on custom Jamb Depths is limited to 10' – 1"
*** Mullions are always supplied in 18 gauge.
All widths and heights are inside dimensions – net door or glass opening size. | |
*Click to enlarge drawings
ROUGH OPENING DIMENSIONS 
WIDTH
Opening width area will vary if using a partial height or stepped sidelight. The opening dimension is calculated separately for each “step” in the sidelight.
ROUGH OPENING WIDTH: Nominal door width + width of glass area(s) + 2″ for each mullion + 1 1/4″
HEIGHT
Opening height equals the net door height. For frames with stepped or partial height sidelights, the light area height is calculated differently than the door area. Measurement is based on calculating the rough opening for the door area first, then measuring from the top down on the sidelight area.
ROUGH OPENING HEIGHT: Door area: Net door height + net glass dimension(s) + 2″ each mullion + 13/16″
SIDELIGHT AREA: Net glass dimension(s) plus 2″ for each mullion + 1 1/4″
Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
Wood casing: can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.
Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
STANDARD FINISHES
PRE-MATCHED CUSTOM FINISHES
ELITE SERIES
430 BRIGHT STAINLESS STEEL (ES204)
304 #4 BRUSHED STAINLESS STEEL (ES206)
Custom color matching is also available. Submit color chip for matching. Consult factory for pricing and lead times.
Notes: Color chips available upon request, all finishes are semi-gloss unless otherwise specified. Touch-up paint available upon request, colors may vary slightly. For complete technical information, contact your Timely distributor or our Marketing Service Department. Colors & price subject to change.
*Click to enlarge drawings
