Modification -TA-26 Hydro Press

What is the TA-26 Hydro Press?
A manually operated 30 ton press which enables the user to emboss an ASA strike, T-Strike (1 3/4"), T-Strike (1 3/8"), 3 1/2" hinge (1/4" radius), 4 1/2" hinge, 4" hinge, flushbolt and deadbolt strike. You can virtually manufacture a custom frame out of stock stick material.

If a customer has his own punch press, can the Timely dies work with that press?
Yes, if the press was a minimum of 30 tons and we were provided with the following information:
1. Shut height
2. Stroke
3. Center distance on the ram bolts
4. Distance from frame to bolt holes in ram

Note: For more information please refer to the Hydro Press & M.O.D. section of your Technical Manual.