Hardware/Accessories - Closers

Which reinforcement would you use for a regular arm closer?
TA-10

Which reinforcement would you use for a parallel arm closer?
TA-12

Which reinforcement would you use for a surface mounted or double acting hinge?
TA-25

When using our TA-35 PVC casing, why can't you use our TA-10 regular arm closer reinforcement and which closer would you use?
Our TA-10 regular arm reinforcement is to thick, which will not let you snap the trim over it, so we have modified it and came out with the TA-10A reinforcement.

If a customer wants to use a concealed closer with our frame, what is the best recommendation?
A floor closer, using standard butt hinges to hang the door, is the best recommendation. If floor conditions do not permit, then a concealed closer mounted in the door and using a regular arm mounting, is the next best solution. We do not recommend an overhead concealed closer mounted in the frame header, as this requires you to modify the header for a jamb bracket which would void any fire rating..

Note: For installation instructions on our TA-10, TA-10A, TA-12 and TA- 25, please refer to the Installation Instructions section of your Technical Manual