uses 
LODGING OFFICE MEDICAL
OFFICE
DORMITORIES BUILDINGS
OF WORSHIP
 
ASSISTED
LIVING
MULTI-
FAMILY
SCHOOLS HOSPITAL
non-surgical
SINGLE
FAMILY
CLASSIC FRAME (S-Series & C-Series) SINGLE WITH GLAZING

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Related Information

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Fire Rating

    Icon for Fire Rating FIRE RATING 45 MINUTE

    ASSEMBLY DOOR AREA GLASS AREA* GENERAL INFORMATION
    Max. Width:

    9' – 7"

     

    Max. Height:

    9' – 11"

    Max. Width:

    4' 0"

     

    Max. Height:

    9' – 0"

     

    dimension bracketWidth:

    up to 2'

     

    Max. Height:

    8' – 11"

    dimension bracketWidth:

    over 2' up to 3' **

     

    Max. Height:

    4' – 6" **

    1. All openings are approved for Positive and Neutral pressure unless otherwise noted.
    2. All ratings apply to steel stud, woodstud, or masonry construction.
    3. all ratings approved for category “A” and “B” doors with category “G” edge sealing.
    4. Timely’s fire rated Metal “U” Insert is recommended for masonry installations. If wood sub-frame is used in place of Metal “U” Insert, it will be necessary to use fire rated drywall on both sides of wood to maintain fire rating.
    5. Aluminum or PVC casing does not affect fire rating. Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
    6. Single frames must be prepared for strike plate or reinforced with (TA-12) for a rim exit.
    Visible light is 1" less in width and height

    View minimum screw length here

     

    All dimensions shown are inside dimensions – net door opening size.

     

    * Multiple Glass Areas can be created with Mullions. The only limitations are Maximum Assembly Width and Height.

    ** For glass widths exceding 24" the maximum glass area is 1296 sq. in. unless approved by local AHJ.

     

    Distributors of Timely Frames may be approved to purchase labels and apply them to frames at their own facility. Intertek has set guidelines and a fee schedule for this program. Requirements and prices are available from Timely or Intertek.

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Rough Openings

    DOOR FRAMES WITH SIDELIGHT(S) – NO TRANSOM Rough Opening Classic Single/Dutch
    WIDTH

    Opening width area will vary if using a partial height or stepped sidelight. The opening dimension is calculated separately for each “step” in the sidelight.

    ROUGH OPENING WIDTH: Nominal door width + width of glass area(s) + 2" for each mullion + 1 1/4"
    HEIGHT

    Opening height equals the net door height. For frames with stepped or partial height sidelights, the light area height is calculated differently than the door area. Measurement is based on calculating the rough opening for the door area first, then measuring from the top down on the sidelight area.

    ROUGH OPENING HEIGHT: Door area: Net door height + net glass dimension(s) + 2" each mullion + 13/16"
    SIDELIGHT AREA: Net glass dimension(s) plus 2" for each mullion + 1 1/4"
     
    DOOR FRAMES WITH TRANSOM(S) WITH OR WITHOUT SIDELIGHTS Rough Opening Classic Single/Dutch
    WIDTH

    For standard frame with transom and no sidelights, opening width is same as for a three sided frame. Opening width area will vary if using a partial height or stepped sidelight. The opening dimension is calculated separately for each “step” in the sidelight.

    ROUGH OPENING WIDTH: Standard frame: Net door width + 1 1/4"
    ROUGH OPENING: Sidelight frame: Nominal door width + net with of each glass area + 2" for each mullion + 1 1/4"
    HEIGHT

    Opening height includes the net door height plus the transom mullion(s) and glass area(s). For frames with stepped or partial height sidelights, the light area height is calculated differently than the door area. Measurement is based on calculating the rough opening for the door area first, then measuring from the top down on the sidelight area.

    ROUGH OPENING HEIGHT: Door area: Net door height + net glass dimension(s) + 2" for each mullion + 13/16"  
    SIDELIGHT AREA: Sidelight area: Net glass dimension(s) plus 2" for each mullion + 1 1/4"  
    Download Classic – Single with Glazing | Rough Opening image
       

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Casing Options

    Casing Profiles for Timely Steel Door Frames

    Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
    Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

    Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Color Options

    Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations.

    STOCK COLORS   PRE-MATCHED CUSTOM COLORS  
    Standard Price Custom color matching is also available. Submit color chip for matching. Consult factory for pricing.          
             
    Timely carries a large raw materials inventory of Stock finishes. navaho White chip winter White chip
            NAVAJO WHITE
    (CC104)
      WINTER WHITE
    (CC105)
     
                     
    browntone chip white White chip

      white Smoke chip   bone China chip   designer White chip          
    BROWNTONE
    (SC101)*†
    WHITE WHITE
    (CC301)
      WHITE SMOKE
    (CC302)
      BONE CHINA
    (CC303)
      DESIGNER WHITE
    (CC304)
                     
    western White chip charcol chip   Cape Cod Grey chip   neutral Grey chip   Nickel chip  
    WESTERN WHITE
    (SC107)*†
    CHARCOAL
    (CC401)
      CAPE COD GRAY
    (CC402)
      NEUTRAL GRAY
    (CC403)
      NICKEL
    (CC404)
                     
    primer EG chip drift Wood chip   sandy Beach chip   cameo Beige-chip   cozy Peach chip  
    PRIMER EG (SC109)*† DRIFTWOOD
    (CC501)
      SANDY BEACH
    (CC502)
      CAMEO BEIGE
    (CC503)
      COZY PEACH
    (CC504)
    Add 52¢ per ft.
                   
    autumn Brown chip brown Sugar chip   cocoa chip   doe Skin chip   harvest Mood chip  
    AUTUMN BROWN
    (SC102)*
    BROWN SUGAR
    (CC601)
      COCOA
    (CC602)
      DOESKIN
    (CC603)
      HARVEST MOON
    (CC604)
                     
    black chip cordovian chip   ruby Red chip   rose Dust chip   mauve Mist chip  
    BLACK
    (SC103)*†
    CORDOVAN
    (CC701)
      RUBY RED
    (CC702)
      ROSEDUST
    (CC703)
      MAUVE MIST
    (CC704)
                     
    Stone Grey chip pacific Blue chip   Twilight chip   country Blue chip   jade chip  
    STONE GRAY
    (SC106)*
    PACIFIC BLUE
    (CC801)
      TWILIGHT
    (CC802)
      COUNTRY BLUE
    (CC803)
      JADE
    (CC901)
                     
    alumatone Chip
    kentucky Grass chip   miami Waters chip   malibu Green chip   black nickle Chip.png  
    ALUMATONE
    (SC108)*
    KENTUCKY GRASS (CC902)   MIAMI WATERS
    (CC903)
      MALIBU GREEN
    (CC904)
      BLACK NICKEL
    (CC 905)
                     

    *Available for Adjustable Frames in powder coat

    †Available prefinished for Fixed Throat Kerf frames

    Close match to clear anodized aluminum

    Metal Plating with Clear Coat Gloss


     
    ELITE SERIES   black nickle Chip.png   black nickle Chip.png   black nickle Chip.png  
     
    Colors shown may vary slightly.   BRIGHT SOLID BRASS (ES201) STAINLESS STEEL 430 BRIGHT (ES204) 304 #4 BRUSHED STAINLESS STEEL (ES206)  
        BRIGHT PLATED BRASS (ES202)      
       

    CLASSIC FRAME (S-Series) | Frame Profiles Icon S Series Large

    Click to enlarge drawings

    S-Series 20 gauge CRS
    1 3/8" Door Available in both door sizes 1 3/4" Door
    Classic S-Series Frame Profile (A) Minimum order quantity of 100
    frames for Profiles A and G.
    Classic S-Series Frame Profile (G)
    Classic S-Series Frame Profile (C) Classic S-Series Frame Profile (F) Classic S-Series Frame Profile (J)
    S-series Footer

    CLASSIC FRAME (C-Series) | Frame Profiles Icon C Series Large

    Click to enlarge drawings

    C-Series 18 gauge CRS
    1 3/8" Door Available in both door sizes 1 3/4" Door
    Classic C-Series Frame Profile (A) Classic C-Series Frame Profile Classic C-Series Frame Profile (G)
    Classic C-Series Frame Profile (B) Classic C-Series Frame Profile (E) Classic C-Series Frame Profile (H)
    Classic C-Series Frame Profile (C) Classic C-Series Frame Profile (F) Classic C-Series Frame Profile (J)
    Classic C-Series Frame Profile (CC) Classic C-Series Frame Profile (FF) Classic C-Series Frame Profile (JJ)
    Classic C-Series Frame Profile (CE) Classic C-Series Frame Profile (FE) Classic C-Series Frame Profile (JE)
    Classic C-Series Frame Profile (D) Classic C-Series Frame Profile (channel section) Classic C-Series Frame Profile (K)
    Classic C-Series Frame Profile (EE)
    FX  3 ¾" FACE HEADER — Use with sub frame for CMU Application
    EX  3 ¾" FACE NO STOP HEADER — Use with standard frame for Concealed Overhead Closer Installation
    FXi  3 ¾" FACE INSERT — Use for sub frame at head with standard frame in CMU
    Classic C-Series Frame Profile (Fex) Classic C-Series Frame Profile (Eex) Classic C-Series Frame Profile (Eexi)
    GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.
    Classic C-Series Frame Profile (Mullion w/Glazing) Classic C-Series Frame Profile (Frame w/Stop and Glazing)) Classic C-Series Frame Profile (Mullion w/Glazing No Stop)
     
    NOTES: 1. C-Series Sidelights are only avaliable in Profiles C, E, or F.    2. 4" Sidelights are only avaliable in Profiles E or G.     3. Profiles are shown with TA-8 Casing for example only.
     

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Elevations

    Click to enlarge drawings

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Details

    Click to enlarge drawings

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing

    PDF Image Thumb Classic Download File in Adobe Acrobat Format PDF DOWNLOAD Classic – Single with Glazing.pdf To save the file, right click on the link, choose to Save Link As and save the file to a location on your computer.